Today I have tested version 3.0.0 of Redis server which includes Redis cluster. Here are some first thoughts about this.
Setup
Here are my servers:
# 212.71.252.54 / 192.168.171.141 / node1
# 176.58.103.254 / 192.168.171.142 / node2
# 178.79.153.89 / 192.168.173.227 / node3
Local hosts (on each server):
# local hosts
192.168.171.141 node1
192.168.171.142 node2
192.168.173.227 node3
And remote (on my PC):
# remote hosts
212.71.252.54 node1
176.58.103.254 node2
178.79.153.89 node3
First of all, let’s download and extract it (on each node).
$ mkdir build && cd build
$ wget http://download.redis.io/releases/redis-3.0.0.tar.gz
$ tar -xvzf redis-3.0.0.tar.gz
$ cd redis-3.0.0/
Now we can build it
$ apt-get install -y make gcc build-essential
$ make MALLOC=libc # also jemalloc can be used
Let’s run tests
$ apt-get install -y tk8.5 tcl8.5
$ make test
# a lot of output, should be green
Then we can start Redis
$ src/redis-server ./redis.conf
Cluster configuration
We need to update our configuration file for each node
# redis.conf
bind node1 # for node1
cluster-enabled yes
cluster-config-file nodes-6379.conf
cluster-node-timeout 5000
Here’s what should displayed:
29338:M 13 Apr 21:05:00.214 * No cluster configuration found, I'm a1eec932d923b55e23a5fe6a488ed7a97e27c826
_._
_.-``__ ''-._
_.-`` `. `_. ''-._ Redis 3.0.0 (00000000/0) 64 bit
.-`` .-```. ```\/ _.,_ ''-._
( ' , .-` | `, ) Running in cluster mode
|`-._`-...-` __...-.``-._|'` _.-'| Port: 6379
| `-._ `._ / _.-' | PID: 29338
`-._ `-._ `-./ _.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' | http://redis.io
`-._ `-._`-.__.-'_.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' |
`-._ `-._`-.__.-'_.-' _.-'
`-._ `-.__.-' _.-'
`-._ _.-'
`-.__.-'
29338:M 13 Apr 21:05:00.246 # Server started, Redis version 3.0.0
29338:M 13 Apr 21:05:00.247 * DB loaded from disk: 0.000 seconds
29338:M 13 Apr 21:05:00.247 * The server is now ready to accept connections on port 6379
Quite a lot of noisy debug information, but here is one line that is extremely important:
No cluster configuration found, I'm a1eec932d923b55e23a5fe6a488ed7a97e27c826
So, our Redis server is running in cluster mode (… repeating same steps on other nodes …)
Connecting nodes
Now we have 3 nodes:
node1:6379
node2:6379
node3:6379
Let’s connect them! Redis has a tool for connecting nodes called redis-trib.rb. And yes, it’s a ruby script and it requires redis gem to be installed (not a problem in my case).
$ src/redis-trib.rb
Usage: redis-trib <command> <options> <arguments ...>
create host1:port1 ... hostN:portN
--replicas <arg>
check host:port
fix host:port
reshard host:port
--from <arg>
--to <arg>
--slots <arg>
--yes
add-node new_host:new_port existing_host:existing_port
--slave
--master-id <arg>
del-node host:port node_id
set-timeout host:port milliseconds
call host:port command arg arg .. arg
import host:port
--from <arg>
help (show this help)
For check, fix, reshard, del-node, set-timeout you can specify the host and port of any working node in the cluster.
For some reason, this tool does not support host names, we have to pass IP addresses manually.
$ src/redis-trib.rb create 192.168.171.141:6379 192.168.171.142:6379 192.168.173.227:6379
>>> Creating cluster
Connecting to node 192.168.171.141:6379: OK
Connecting to node 192.168.171.142:6379: OK
Connecting to node 192.168.173.227:6379: OK
>>> Performing hash slots allocation on 3 nodes...
Using 3 masters:
192.168.171.141:6379
192.168.171.142:6379
192.168.173.227:6379
M: 78a5bbdcd545848be8a66126a71dc69dd6d23bc4 192.168.171.141:6379
slots:0-5460 (5461 slots) master
M: 1f6ed2478b461539f76b0b627de2e1b8565df719 192.168.171.142:6379
slots:5461-10922 (5462 slots) master
M: 7a092b06c8c75e98176b7612e74d2e89e8b3eda7 192.168.173.227:6379
slots:10923-16383 (5461 slots) master
Can I set the above configuration? (type 'yes' to accept):
Looks beautiful! Each node is responsible for 1/3 of data. Typing ‘yes’…
>>> Nodes configuration updated
>>> Assign a different config epoch to each node
>>> Sending CLUSTER MEET messages to join the cluster
Waiting for the cluster to join.
>>> Performing Cluster Check (using node 127.0.0.1:7001)
M: 78a5bbdcd545848be8a66126a71dc69dd6d23bc4 192.168.171.141:6379
slots:0-5460 (5461 slots) master
M: 1f6ed2478b461539f76b0b627de2e1b8565df719 192.168.171.142:6379
slots:5461-10922 (5462 slots) master
M: 7a092b06c8c75e98176b7612e74d2e89e8b3eda7 192.168.173.227:6379
slots:10923-16383 (5461 slots) master
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.
That’s it!
Testing our cluster
Here is how to check the status of the cluster:
$ src/redis-cli -h node2 cluster nodes
7a092b06c8c75e98176b7612e74d2e89e8b3eda7 node1:6379 master - 0 1428949630273 3 connected 10923-16383
78a5bbdcd545848be8a66126a71dc69dd6d23bc4 node2:6379 myself,master - 0 0 1 connected 0-5460
1f6ed2478b461539f76b0b627de2e1b8565df719 node3:6379 master - 0 1428949629272 2 connected 5461-10922
Every single node knows about others, so the previous command can be executed on any node.
Benchmarks
Let’s setup redis-rb-cluster
$ wget https://github.com/antirez/redis-rb-cluster/archive/master.zip
$ unzip master.zip
$ cd redis-rb-cluster-master
We have the file example.rb which is pretty boring itself. It just writes random keys into our cluster and prints them:
$ ruby example.rb
1
2
3
...
Another example is more interesting.
$ ruby consistency-test.rb node1 6379
850 R (0 err) | 850 W (0 err) |
4682 R (0 err) | 4682 W (0 err) |
8490 R (0 err) | 8490 W (0 err) |
12196 R (0 err) | 12196 W (0 err) |
15785 R (0 err) | 15785 W (0 err) |
This tool writes a huge amount of data to Redis and check whether previously written data is still there.
Testing the failover
This chapter is something that I still don’t understand. I have tried to reproduce it many times and every time I have the same result.
Run consistency-test.rb again and kill any other node.
$ src/redis-cli -h node2 debug segfault
And here is the output that I’m getting every time:
70273 R (0 err) | 70273 W (0 err) |
Reading: Too many Cluster redirections? (last error: MOVED 9515 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 9515 127.0.0.1:7002)
72378 R (1 err) | 72378 W (1 err) |
Reading: Too many Cluster redirections? (last error: MOVED 9650 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 9650 127.0.0.1:7002)
72379 R (2 err) | 72379 W (2 err) |
Reading: Too many Cluster redirections? (last error: MOVED 5797 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 5797 127.0.0.1:7002)
72380 R (3 err) | 72380 W (3 err) |
Reading: Too many Cluster redirections? (last error: MOVED 9772 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 9772 127.0.0.1:7002)
72384 R (4 err) | 72384 W (4 err) |
Reading: Too many Cluster redirections? (last error: MOVED 10245 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 10245 127.0.0.1:7002)
72385 R (5 err) | 72385 W (5 err) |
Reading: Too many Cluster redirections? (last error: MOVED 7376 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 7376 127.0.0.1:7002)
72385 R (6 err) | 72385 W (6 err) |
Reading: Too many Cluster redirections? (last error: MOVED 6781 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 6781 127.0.0.1:7002)
72396 R (7 err) | 72396 W (7 err) |
Reading: Too many Cluster redirections? (last error: MOVED 10275 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 10275 127.0.0.1:7002)
72401 R (8 err) | 72401 W (8 err) |
Reading: Too many Cluster redirections? (last error: MOVED 8639 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 8639 127.0.0.1:7002)
72402 R (9 err) | 72402 W (9 err) |
Reading: Too many Cluster redirections? (last error: MOVED 8173 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 8173 127.0.0.1:7002)
72402 R (10 err) | 72402 W (10 err) |
Reading: Too many Cluster redirections? (last error: MOVED 9525 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 9525 127.0.0.1:7002)
72403 R (11 err) | 72403 W (11 err) |
Reading: Too many Cluster redirections? (last error: MOVED 9346 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 9346 127.0.0.1:7002)
72406 R (12 err) | 72406 W (12 err) |
Reading: Too many Cluster redirections? (last error: MOVED 6391 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 6391 127.0.0.1:7002)
72411 R (13 err) | 72411 W (13 err) |
Reading: Too many Cluster redirections? (last error: MOVED 6353 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 6353 127.0.0.1:7002)
72413 R (14 err) | 72413 W (14 err) |
Reading: Too many Cluster redirections? (last error: MOVED 10245 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 10245 127.0.0.1:7002)
72418 R (15 err) | 72418 W (15 err) |
Reading: Too many Cluster redirections? (last error: MOVED 6438 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 6438 127.0.0.1:7002)
72422 R (16 err) | 72422 W (16 err) |
Reading: Too many Cluster redirections? (last error: MOVED 6826 127.0.0.1:7002)
Writing: Too many Cluster redirections? (last error: MOVED 6826 127.0.0.1:7002)
72423 R (17 err) | 72423 W (17 err) |
Reading: Too many Cluster redirections? (last error: MOVED 9713 127.0.0.1:7002)
Writing: CLUSTERDOWN The cluster is down
Reading: CLUSTERDOWN The cluster is down
Reading: CLUSTERDOWN The cluster is down
Writing: CLUSTERDOWN The cluster is down
72423 R (295 err) | 72423 W (295 err) |
72423 R (2219 err) | 72423 W (2219 err) |
Reading: CLUSTERDOWN The cluster is down
Writing: CLUSTERDOWN The cluster is down
Reading: CLUSTERDOWN The cluster is down
Writing: CLUSTERDOWN The cluster is down
72423 R (4186 err) | 72423 W (4186 err) |
Reading: CLUSTERDOWN The cluster is down
Writing: CLUSTERDOWN The cluster is down
72423 R (6190 err) | 72423 W (6190 err) |
Writing: CLUSTERDOWN The cluster is down
72423 R (8207 err) | 72423 W (8207 err) |
Reading: CLUSTERDOWN The cluster is down
Reading: CLUSTERDOWN The cluster is down
Writing: CLUSTERDOWN The cluster is down
As you can see, the cluster goes down and errors amount quickly increases. After all this steps I’m getting broken cluster (and each separated node is broken, too)
$src/redis-cli -h node3 ping
PONG
$src/redis-cli -h node3 get 'test'
(error) CLUSTERDOWN The cluster is down
The cluster goes up after booting the first node manually
# booting node2 manually...
$ src/redis-cli -h get qwe
(error) MOVED 757 127.0.0.1:7001
$ src/redis-cli -p 7001 get qwe
(nil)
I hope this will be fixed soon.
Conclusion
According to the repository
there are still a lot of things that need to be done before using Redis Cluster in production, but I would like to say Thanks to all contributors of Redis, redis-rb and redis-rb-cluster. Good job and looking forward to use in the real-world!